Survival First Aid: Treating Bone Fractures
Broken bones, fractures, and joint injuries are a common thing that happens on a daily basis. We’re only one phone call away from receiving immediate medical assistance if in need. It’s not a life-threatening situation in the 21st century unless there are immediate complications. But what if we happen to break a hand or a leg in a TEOTWAWKI scenario, where medical assistance will cease to be a commodity and when our very survival will depend on our mobility and full functionality? In case this happens, all is not lost, there are procedures to follow that will get us out of harm’s way. But if the treatment is to be successful, you’ll need to do everything by the book. The first thing to do is to make sure that the injured person’s life is not threatened in any way; once he’s out of harm’s way you can start treating the injury. Once his vital signs have been checked and you’ve concluded that he has been completely stabilized, you can start treating the fracture.
First and foremost, you’ll need to make sure that what you’re dealing with is a fracture and not something else. Most commonly fractures bear the following signs and symptoms: the inability to use or bear weight on the affected body part, severe pain, swelling, deformity, discoloration etc. In some cases, the ones that suffer the injury might even hear a loud cracking noise. In extreme cases, the fracture is so bad that the bone will pierce the flesh. Apart from bone fractures, there are other injuries that are easier to treat and not as severe but can be just as debilitating if left untreated, like muscle strained ligaments and joint dislocations. Fractures can be very tricky and should be approached with care. Many complications can arise (damaged blood vessels, torn muscles, damaged nerves), so minimal and gentle manipulation is imperative. If the affected area becomes swollen, pale, numb and the patient succumbs to shock, it’s probably that an important blood vessel has been damaged, causing internal bleeding. In this case, you should put on hold the fracture treatment and stop the hemorrhaging instead. The best method of dealing with broken bones is splinting. Many people would advise that the splint should be applied without traction, in the position found, but this would be completely impractical, as the bone should be placed in an anatomically correct position in order to prevent severe pain and loss of function (partial or even complete). So it’s ok to manipulate the fracture gently.
Broken legs
You’ll need two forked branches that are strong enough, so you’ll need them to be at least 2 inches in diameter. One should measure the exact distance from the armpit to 12 inches past his broken leg, while the other should measure the distance from the groin to 12 inches past the broken leg. Next, you’ll need to pad the splints. The ends that go past the leg (that measure 12 inches past the leg) will get a 2 inch in diameter branch placed in between them. Now the two splints should be tied together accordingly with the splinting guidelines with anything you can get your hands on cloth, vines, rope etc. With the same material (provided it’s strong enough), tie a wrap around the ankle; the free ends will get tied to the cross member. Finally, add a twisting stick at the free end of the ankle wrap; twisting the wrap will provide traction. Continue twisting until the broken leg is in line with the healthy leg.
Broken feet
Splinting a foot will require a piece of long and tough cardboard or plastic. This piece of material should be bent lengthwise so that you get three identical (more or less) segments. You can add cloth or padding on the inner side to add comfort. Place the splint under the foot and the leg, so that it reaches halfway to the knee, yet it goes enough under the foot to immobilize the ankle; once this is done, add some cloth between the ankle and splint. Fold the cardboard around the leg and secure it with some tape. Now do the same as you did with the ankle for all the empty spaces between the leg and the splint: add cloth. You can reduce swelling and discomfort with ice, but don’t keep it on for longer than 20 minutes.
Broken arms
Once the arm is adjusted in its natural position, you should apply the splints. You can use any material as long as it’s hard enough (strong cardboard, sticks, wood etc.) and long enough, so they extend past the wrist and the elbow. Before the splints go on, wrap the arm in a clean and soft cloth, for comfort more than anything. Once the arm is wrapped, you can wrap the splints as well. The splints should be applied equally when it comes to length; for forearm fractures, the splints should go beyond the wrist, while in the case of upper arm fractures, they should extend beyond the elbow. The cloth that holds the splints together should be at least 5 inches before and after the fracture. Don’t tie the bonds too firmly; if you can slip two fingers in, it’s perfect. In order to keep the arm secure and in place, tie a piece of cloth around the neck of the patient and slip the fractured hand in it. The hand should be centered on the sling and it should be at a flat and horizontal position. If the elbow is at a 90-degree angle, you’ve done an excellent job.
Broken hands
Securing a broken hand in place will be a bit trickier, as you’ll need a material that is strong and rigid enough to hold the hand in place, yet flexible enough to fold. It should extend from the wrist to the end of the fingers. The hand should be straight and relaxed, with its fingers slightly opened. Place some cloth in the palm of the hand and place the first splint under the wrist, so it extends to the end of the fingers. The splint should be folded up and around the wrist. Tie it together and add tape for extra security. Once you’re done, stuff the open spaces with a cloth to increase comfort and firmness.
If you ever find yourself in the posture of treating broken bones or fractures, remember the first thing to do is to keep calm and act with caution. You’ll need to be very aware and have enough knowledge in the matter. You can educate yourself further in the anatomy of the limbs and learn a few knots that will secure your splints in place. You can practice these techniques and even take up courses for first aid, so you won’t have to do it for the first time in a SHTF situation.
Tags: bone fractures, Emergency, emergency recipe, family survival, fractures, health, medicine, mind preparedness, preparedness, preppers, survival, Survival Plan, survive, uses of
DIY, Emergency, Feel, Health, How To..., Medical Kit, Prepper Skills, Survival Medicine, Survival Plan, Wilderness Survival | MFSP | 
January 1, 2016 03:28 | 
Comments (0)
photo source: www.doctortipster.com
