Posts tagged: cutting edge performance knife

How To Sharpen A Knife While Minimizing Mistakes And Maximizing Cutting Edge Performance

How To Sharpen A Knife While Minimizing Mistakes And Maximizing Cutting Edge Performance

DISCLAIMER: I ask that you read the entire article and keep in mind that this is one of those discussions that rank up there with talking about religion and politics. And please, let the results speak for themselves.

I don’t claim to know everything there is to know about sharpening. It’s a lifelong journey and one that I feel isn’t perfected overnight. However, I will say that “shaving sharp” is only the beginning of the sharpness that can be obtained, a lot like how obtaining a black belt is only the beginning of learning in martial arts. I hope to get those that don’t already know, to that “beginning” point, where after I feel that they’ll continue to learn and grow.

First, before you go tearing off and grab your favorite knife to start, I’d like to mention four reasons why people fail at sharpening.

1. They start off with a knife that is EXTREMELY dull to learn on.
2. They don’t see progress and change their technique.
3. They progress too soon from a coarser to a finer medium, or start out on too fine a medium.
4. They have too steep of a sharpening angle.

Common Mistakes

Failure 1: Starting off with a knife that is EXTREMELY dull to learn on.

I suggest starting on a knife that you may actually think is sharp, even a new knife or one that is barely used. If you can’t do that, try having someone sharpen it who knows how to sharpen and then use your sharpening skills to maintain that edge just as soon as it looses it cutting ability. Even most new knives don’t have a truly sharp edge. By training and learning your skills on a fairly sharp knife, you make it easier on yourself because you’ll be able to see progress much quicker. You’ll also be able to tell what’s working and what’s not. Every time that edge starts to get a little dull, take it straight to your stone and put in a few minutes getting back that edge. It’ll be much less frustrating than spending an hour or more whaling away at a very dull knife, unable to see any progress.

Failure 2: Not seeing progress and changing technique.

This happens when you’re trying to learn how to sharpen and you start with a knife that should’ve been sharpened years ago. You start sharpening and you don’t see any change in the dullness or sharpness of the knife, so you try something else, which also fails to bring an edge within five or ten minutes, so you try something else – all without making any real progress in the long run. I consider myself proficient at sharpening, but even I don’t try restoring an edge by hand that’s extremely bad unless I have no other choice. Even then, sometimes it’s best to take a break if you haven’t established an edge and are getting tired. Then come back and keep working, using the same angle you had before until you get the edge you were working for. If you’re working with a hard steel and extremely worn edge, sometimes it can take well over thirty minutes of sharpening by hand just to establish an edge.

Failure 3: Progressing too soon to a finer medium or start out on too fine a medium.

Sharpening is no different than sanding wood. If you need to move a lot of material, it’s best to start out with a coarse grit and not move to a finer grit until you’ve removed all the steel you need to with the coarser grit. Learning the different grits like Japanese, CAM or Microns is an entire article in itself. I use a 1000 Japanese water stone for my coarse stone, which is equivalent to a 700 Grit or 14 Microns. This will produce a shaving sharp edge with practice, yet is still coarse enough to remove plenty of steel. However, if I were using sandpaper instead, I would start with 80 or 120 grit, which makes it very easy to move a lot of steel.

Failure 4: Using too steep of an angle.

There are several different factors that determine the proper angle to sharpen:

• The purpose you’re using the knife for. Heavy cutting or light slicing?
• The quality of the steel you are working with. Can it hold a steep edge?
• Personal preference.

I prefer to hold a shallower angle on my knives than most, which sacrifices some of the edge retention or longevity of the edge for cutting performance. That being said, in defense of my position, I try to use my knifes for cutting, not plowing my way through things. I’ll discuss what angle you should sharpen your knives at next.

Read Full Article HERE
By Patrick Roehrman

www.itstactical.com

Image For Pinterest:

How To Sharpen A Knife While Minimizing Mistakes
Graphic – www.myfamilysurvivalplan.com. Image – Pixabay (PD)